New pull request
Store bathroom night brightness as a whole percentage
All checks were successful
Build and test / build (pull_request) Successful in 1m13s
Build and test / release (pull_request) Has been skipped
#72 by Claude was merged 2026-09-25 06:07:37 +00:00
Light the bathroom at a stored level in night mode
All checks were successful
Build and test / build (pull_request) Successful in 1m11s
Build and test / release (pull_request) Has been skipped
#71 by Claude was merged 2026-09-24 14:49:07 +00:00
Disable touch input when travelling
All checks were successful
Build and test / build (pull_request) Successful in 1m18s
Build and test / release (pull_request) Has been skipped
#70 by rob was merged 2026-09-23 07:22:13 +00:00
Add NODE_WATER_HEATER (0x41) firmware
All checks were successful
Build and test / build (pull_request) Successful in 1m12s
Build and test / release (pull_request) Has been skipped
#69 by Claude was merged 2026-09-22 09:50:41 +00:00
Default origin and ramp on LevelEndpoint::setOn and request
All checks were successful
Build and test / build (pull_request) Successful in 1m5s
Build and test / release (pull_request) Has been skipped
#68 by Claude was merged 2026-09-22 07:51:11 +00:00
Keep ceiling lights in sync when using touch bar
All checks were successful
Build and test / build (pull_request) Successful in 1m6s
Build and test / release (pull_request) Has been skipped
#67 by rob was merged 2026-09-22 07:49:44 +00:00
Add NODE_KITCHEN (0x11) firmware
All checks were successful
Build and test / build (pull_request) Successful in 1m3s
Build and test / release (pull_request) Has been skipped
#66 by Claude was merged 2026-09-22 07:35:09 +00:00
Make PWM frequency and resolution configurable per endpoint
All checks were successful
Build and test / build (pull_request) Successful in 54s
Build and test / release (pull_request) Has been skipped
#65 by Claude was merged 2026-09-22 06:48:50 +00:00
Fetch a per-node-type manifest instead of the shared file
All checks were successful
Build and test / build (pull_request) Successful in 55s
Build and test / release (pull_request) Has been skipped
#64 by Claude was merged 2026-09-21 06:46:21 +00:00
Cut verbosity across the firmware for less code, same behaviour
All checks were successful
Build and test / build (pull_request) Successful in 55s
Build and test / release (pull_request) Has been skipped
#63 by Claude was merged 2026-09-20 15:48:12 +00:00 1 approval
Skip a firmware fetch the manifest says is not newer
All checks were successful
Build and test / build (pull_request) Successful in 48s
Build and test / release (pull_request) Has been skipped
#62 by Claude was merged 2026-09-20 11:59:52 +00:00
Report the CalVer release as the firmware version
All checks were successful
Build and test / build (pull_request) Successful in 48s
Build and test / release (pull_request) Has been skipped
#61 by Claude was merged 2026-09-20 11:20:24 +00:00
Say what a control frame during a transfer does
All checks were successful
Build and test / build (pull_request) Successful in 47s
Build and test / release (pull_request) Has been skipped
#60 by Claude was merged 2026-09-19 21:43:13 +00:00
Refresh SYS_WIFI_STATUS state 5 like every other state
All checks were successful
Build and test / build (pull_request) Successful in 1m1s
Build and test / release (pull_request) Has been skipped
#59 by Claude was merged 2026-09-19 21:26:29 +00:00
Cut the firmware-update comments back to what the code cannot say
All checks were successful
Build and test / build (pull_request) Successful in 4m2s
Build and test / release (pull_request) Has been skipped
#58 by Claude was merged 2026-09-19 21:05:49 +00:00
Cull the comments in the firmware update tests
All checks were successful
Build and test / build (pull_request) Successful in 46s
Build and test / release (pull_request) Has been skipped
#57 by Claude was merged 2026-09-19 20:41:41 +00:00
Size the sanitised fixtures to the length under test
All checks were successful
Build and test / build (pull_request) Successful in 1m10s
Build and test / release (pull_request) Has been skipped
#56 by Claude was merged 2026-09-19 20:06:44 +00:00
Reboot into an installed image whatever the bus says
All checks were successful
Build and test / build (pull_request) Successful in 50s
Build and test / release (pull_request) Has been skipped
#55 by Claude was merged 2026-09-19 16:19:36 +00:00
Report a failed update as SYS_WIFI_STATUS state 6
All checks were successful
Build and test / build (pull_request) Successful in 1m19s
Build and test / release (pull_request) Has been skipped
#54 by Claude was merged 2026-09-19 15:33:51 +00:00
Build the native tests under address and UB sanitisers
All checks were successful
Build and test / build (pull_request) Successful in 4m12s
Build and test / release (pull_request) Has been skipped
#53 by Claude was merged 2026-09-19 15:33:37 +00:00