Add a printable case for the CAN node #7
Loading…
Reference in a new issue
No description provided.
Delete branch "feat/node-case"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
A two-part FreeCAD case for the CAN node: a base with four mounting ears and a lid held by four M3 × 8 screws through the board's mounting holes.
The lid has slots over the terminal screws, debossed names for every terminal pin and a poke tube for the reset button. The walls are open at the terminals and the USB-C socket.
Checked against the board's STEP export with no clashes. Not printed yet, so the fit and the 2 mm lettering are untested. The reset button has no 3D model, so the tube's height above it is unchecked.
Only the
.FCStdis tracked, so this should not cut a release.