Fuse each lighting output with a mini blade fuse #18

Merged
rob merged 3 commits from feat/lighting-fuses into main 2026-11-16 19:26:37 +00:00
Collaborator

Each light's V+ leg now runs through its own mini blade (ATM) fuse in a Keystone 3568 holder, F2–F7, so a shorted light wire blows one fuse instead of relying on the upstream supply fuse. The board grows from 89 × 70 mm to 95 × 70 mm, and the lid has a hole over each fuse so they can be changed with the case closed.

  • The flyback diodes stay on VIN_RAW, the supply side of the fuses. The fused side cannot reach them on two layers without cutting the supply pour.
  • The boot switch moves under the reset button, and the buck, USB and output blocks shift 8 mm left to make room.
  • The front-silk LIGHT n and +/- labels by the light terminals are gone. The back silk and the lid still mark them.
  • Each switched output narrows to a 1.7 mm track between the holder pad rows.
  • The holders have no LCSC number, so they land in the hand-solder list.

ERC reports 0 violations. DRC reports 0 errors and 0 unconnected, with parity showing only the four mounting-hole extra_footprint entries. Both case parts build as single valid solids.

Not checked: the holder footprint and the lid's fuse holes against physical parts, holder stock, and a printed case.

Each light's `V+` leg now runs through its own mini blade (ATM) fuse in a Keystone 3568 holder, F2–F7, so a shorted light wire blows one fuse instead of relying on the upstream supply fuse. The board grows from 89 × 70 mm to 95 × 70 mm, and the lid has a hole over each fuse so they can be changed with the case closed. - The flyback diodes stay on `VIN_RAW`, the supply side of the fuses. The fused side cannot reach them on two layers without cutting the supply pour. - The boot switch moves under the reset button, and the buck, USB and output blocks shift 8 mm left to make room. - The front-silk `LIGHT n` and `+`/`-` labels by the light terminals are gone. The back silk and the lid still mark them. - Each switched output narrows to a 1.7 mm track between the holder pad rows. - The holders have no LCSC number, so they land in the hand-solder list. ERC reports 0 violations. DRC reports 0 errors and 0 unconnected, with parity showing only the four mounting-hole `extra_footprint` entries. Both case parts build as single valid solids. Not checked: the holder footprint and the lid's fuse holes against physical parts, holder stock, and a printed case.
Each light's V+ leg now runs through a Keystone 3568 holder, so a
shorted light wire blows its own fuse. The board grows to 95 x 70 mm
and the lid gains a hole over each fuse.

The flyback diodes stay on the supply side of the fuses. The fused
side cannot reach them on two layers.
rob merged commit eb7edf32e8 into main 2026-11-16 19:26:37 +00:00
rob deleted branch feat/lighting-fuses 2026-11-16 19:26:37 +00:00
Sign in to join this conversation.
No reviewers
No labels
No milestone
No project
No assignees
2 participants
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set

Reference
CamperCan/hardware!18
No description provided.